Journal of Stress Analysis

Author Index

A

Aalami Aaleagha, M.E. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
Abaie, M.M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Abbasian Arani, A.A. Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
Abdi, M. On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
Abdolalian, H. Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
Abdolazimzadeh, S. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
Abdullah, A. An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
Abedian, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
Afrasiab, H. An Analytical Approach for Modeling Fluid-structure Interaction Problems in Axisymmetric Domains [Volume 6, Issue 2, 2022, Pages 107-116]
Aghaei, Mahdi Fatigue Endurance Optimization of a Steam Turbine Blade Curved Fir-Tree Root [(Articles in Press)]
Aghamohamadpour, M. A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
Aghighi, M.S. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
Ahmadi, O. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
Ahmadian, M.T. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
Ahmadi Yegane, M. The Effect of the Constrained Groove Pressing Process on Mechanical Properties of Thin Pure Copper Sheets [(Articles in Press)]
Ahmadpour, M. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
Akbaripanah, F. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
Akbaripanah, F. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
Akbarzadeh, S. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Alavi Nia, A. A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
Aliakbari, K. The Analysis of Light-duty Truck Diesel Engine Crankshaft Failure [Volume 2, Issue 2, 2018, Pages 11-17]
Aliakbari, K. Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
Alidoosti, M.H. Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
Alihemmati, J. Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
Alimirzaloo, V. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
Alipoor, M. Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
Alizadeh Kaklar, J. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
Amini, R. An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
Amini, S. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Ammar, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
Amoorezaei, K. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
Amoorezayi, M. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
Arabi, H. Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
Arefi, M. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]
Arjmand, M. Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
Arman, M. An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
Asadi, S. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
Asgari, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Ashrafi, M.J. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
Assadollahi, M. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
Atrian, A. Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
Atrian, A. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
Atrian, A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
Atrian, A. Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
Azadi, M. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
Azadi, M. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
Azami, B. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Azarafza, R. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
Azarafza, R. Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]

B

Babaei, S. The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
Bahmanabadi, H. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
Bahmani, F. Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
Bahrami, H. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
Bahrami, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Bahrami Ghalehjoogh, H. Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
Bakhshi-Jooybari, M. Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
Bakhshi-Jooybari, M. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
Balali Dehkordi, H.R. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Balali Dehkordi, R. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Barati, F. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
Barati, F. The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
Barati, F. The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2021, Pages 61-66]
Barati, F. Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
Barkhordari, H. Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
Bayat, A. Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]
Bayati Chaleshtari, M. H. Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
Behjat, B. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
Beiranvand, B. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
Bhad, P. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
Botshekanan Dehkordi, M. Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]
Botshekanan Dehkordi, M. Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]
Botshekanan Dehkordi, M. Nonlinear Quasi-static Analysis of SMA Curved Beams [(Articles in Press)]

C

Chahardoli, S. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
Cheraghback, A. Nonlinear Quasi-static Analysis of SMA Curved Beams [(Articles in Press)]

D

Dabbagh, H. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
Dabbagh, H. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
Darudi, A. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
Davar, A. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
Davar, A. Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
Davari, S. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
Dehghanian, Z. An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2021, Pages 13-28]
Deilami Azodi, H. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
Doniavi, A. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Doryo, H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]

E

Ebrahimi, M. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
Ebrahimi, R. On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
Ebrahimi, Z. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
Esfahanian, M. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Esfandiari, M. The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
Esfandiari, M. The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2021, Pages 61-66]
Eskandari, H. Three-dimensional Fracture Analysis of Defected Tubes under Detonation [Volume 5, Issue 1, 2020, Pages 99-106]
Eskandari Jam, J. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
Eskandari-Naddaf, H. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
Esmaeilnia Omran, M. Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
Etehadi, S. Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]
Etemadi, M. Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]

F

Fallah, A. Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
Fallah, N. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
Farahinezhad, E. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
Farhadi Bansouleh, S. Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]
Fariba, F. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
Farrahi, A. Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
Farrahi, G.H. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
Farshidi, M.H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
Feli, S. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
Feli, S. Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]

G

Galehdari, S.A. Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
Galehdari, S.A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
Ganjiani, M. A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
Ghadimi, M. Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
Ghahremani-Moghadam, D. Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
Ghasemi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Ghasemkhani, A. Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
Ghasemkhani, A. Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
Ghasemkhani, A. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
Ghazizadeh, E. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
Ghiasvand, A. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Gholami, M. Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]
Golmakani, M.E. Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
Gorji, H. Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
Gorji, H. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]

H

Habibi, N. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
Habibi, N. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
Habibi, N. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
Habibi, N. Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2021, Pages 1-12]
Haghighat, H. An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]
Hajibagheri, H.R. An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
Hajizadeh, K. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
Hashemi, Mehdi Fatigue Endurance Optimization of a Steam Turbine Blade Curved Fir-Tree Root [(Articles in Press)]
Hassani, A. Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]
Hassani, A. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
Hassani, A. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Hassanzadeh, M. Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
Hassanzadeh, M. Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
Heidari, A. An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
Heidari, H.R. Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
Heydari, F. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Heydari, H. Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
Heydari Pebdani, F. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
Homayounfard, M. A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
Honarpisheh, M. A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
Honarpisheh, M. Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
Honarpisheh, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Honarpisheh, M. Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
Honarpisheh, M. Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
Hooshmandi, A.H. Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
Hoseini, S.H. Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
Hoseini, S.H. A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
Hoseini Karani, A. Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
Hoseini Vaez, S. R. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [(Articles in Press)]
Hoseini Vaez, S.R. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
Hoseinzadeh-Amirdehi, M. Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
Hosseini, R. Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
Hosseinian, E. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
Hosseinian, S.M. Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
Hosseinipour, S.J. Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
Hosseini Tabar, Z. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
Hosseinzadeh, A. Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
Hosseinzadeh, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]

J

Jabbari Mostahsan, A.H. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
Jafari, S.S. An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2021, Pages 127-138]
Jafari Fesharaki, J. Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
Jafarpour, V. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
Jahanban, M.R. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
Jahani, A.R. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Jaleh, B. Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
Jalilvand, M.M. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Janghorban, A. An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]
Joudaki, J. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
Joudaki, J. Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]

K

Kadkhodaei, M. The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
Kadkhodayan, M. Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
Kadkhodayan, M. The Effect of the Constrained Groove Pressing Process on Mechanical Properties of Thin Pure Copper Sheets [(Articles in Press)]
Karafi, M.R. An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
Karami Khorramabadi, M. Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
Karimi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Karimi, M. Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
Karimi, P. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Karimi, R. Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
Karimi, S. Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
Kashfi, M. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
Kazemi, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Kazemian, M. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
Kazemi Nasrabadi, M. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
Keypour, K. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
Khalkhali, A. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
Khalsa, L. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
Khanlari, H. A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
Kheradmandan, H. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Khorshidi, K. Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
Khorshidi, K. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Khoshgoftar, M.J. Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]
Komasi, M. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
Korminejad, A. Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]

L

Labbafian Mashhadi, A. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
Loghman, A. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]

M

Madadi, A. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
Mahdavi Shirazi, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mahdipour Jalilian, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Mahdipour Jalilian, M. Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]
Mahdipour Jalilian, M. Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
Mahmoodpour, E. Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
Majzoobi, G.H. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
Majzoobi, G.H. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
Majzoobi, G.H. An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2021, Pages 127-138]
M. Alipour, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mansouri, H. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Maraki, M.R. Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
Masoumi, H. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
Matinfar, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mazaheri, H. Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
Mazaheri, H. Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
Mazaheri, H. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
Mazaheri, Y. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Mazdak, S. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
Mehanpour, H. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [(Articles in Press)]
Mirnia, M.J. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
Mirshabani, S.A. An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
Mir Shafiee, S. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
Miyamoto, H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
Moazam, M.A. Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
Moazemi Goudarzi, A. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
Moazemi Goudarzi, A. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Mohammad Doost, H. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
Mohammad Hashemi, Y. The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
Mohammadi, M. Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
Mohammadi, M.R. Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
Mohammadi Dashtaki, P. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Mohammadimehr, M. Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
Mohammadzadeh, A. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
Moharrami, R. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
Moharrami, R. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
Moharrami, R. Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
Mokhtari, S.A. Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2021, Pages 105-125]
Mokhtarishirazabad, M. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
Molaei, M. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
Moradi, K. Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
Moradi, M. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Moradikhah, R. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
Moravej, M. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
Morshedsolouk, F. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Mostaan, H. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
Mousavi, S.H. Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2021, Pages 1-12]
Moussavi, E. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
Moussavi Torshizi, S.E. Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
Mozafari, H. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]

N

Naderi, A.A. Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2021, Pages 105-125]
Naghibi, Z. Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
Nakhodchi, S. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
Namdar, A.H. Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
Narooei, K. An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
Nassiri, A. Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
Nemati, J. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
Nemati Nejad, M. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
Nosoudi, A. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
Nourbakhsh, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
Nourbakhsh, S.H. Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
Nourbakhsh, S.H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Nourbakhsh, S.H. Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
Nourbakhsh, S.H. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
Nouri, A. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
Nouri, A. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
Nourmohammadi, H. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]

O

Omidi bidgoli, M. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]

P

Pak, A. An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
Pasoodeh, B. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
Payandehpeyman, J. Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
Pirmohammad, S. Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]
Pirmohammad, S. Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]

R

Rabiee, A.H. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Rabiee, H. Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
Rafei, Z. Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
Rahmani, K. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
Rahmani, K. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
Ramezankhani, M. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Rashidi, A.M. Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]
Reza Kashyzadeh, K. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]

S

Saadatfar, M. Effect of Interlaminar Weak Bonding and Constant Magnetic Field on the Hygrothermal Stresses of a FG Hybrid Cylindrical Shell Using DQM [Volume 3, Issue 1, 2018, Pages 93-110]
Saadatfar, M. Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
Saadatfar, M. Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
Saadatfar, M. Transient Coupled Hygrothermal Stress Analysis of a Finite Length Functionally Graded Hollow Cylinder [Volume 6, Issue 1, 2021, Pages 89-103]
Sadidi, M. Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
Safaei, A. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
Safarabadi Farahani, M. Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
Safari, M. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
Safari, M. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
Safari, M. A Study on Main and Lateral Bending Angles in Laser Tube Bending Process [Volume 5, Issue 2, 2021, Pages 33-40]
Safari, M. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Safari, M. Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]
Salari, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
Salehebrahimnejad, B. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Salimi, M.H. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
Saljoghi, H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Salmani-Tehrani, M. An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2021, Pages 13-28]
Samawati, S. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
Sedighi, M. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
Seifi, R. Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
Seifi, R. Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
Selahi, E. Failure Study of Hybrid Bonded-bolted Composite Single and Double Lap Joints [Volume 3, Issue 2, 2019, Pages 37-46]
Seyyedi, S.E. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
Shaban, M. Elasticity Solution for Static Analysis of Sandwich Structures with Sinusoidal Corrugated Cores [Volume 1, Issue 1, 2016, Pages 23-31]
Shaban, M. Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]
Shabanlou, E. Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
Shahani, A.R. Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
Shahani, A.R. Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
Shahbaz, M. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Shahbaz, M. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
Shahbazi Karami, J. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
Sharifi, E. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
Sharifi Torki, H. Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
Shariyat, M. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
Shavalipour, A. Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
Sheikhi Azqandi, M. Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
Sheykholeslami, M.R. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
Shirazi, A. A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
Shooshtari, A. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
Sobhi, S. Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
Sodagari, H. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
Soleymani, K. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
Soltanimaleki, A. Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
Sulaiman, S. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]

T

Tadi beni, Y. Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
Tadi Beni, Y. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Taghiloo, M.J. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
Tahmasbi, V. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Tahmasbi, V. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Tahmasbi, V. Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
Torabi, A. Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
Torabi, A. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]

V

Vahdat Azad, N. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
Varghese, V. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
Velayatparvardeh, M.H. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]

Y

Yousefi, A. Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
Yousefi Parchin Oliya, A. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
Yuasa, M. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]

Z

Zamani, R. Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]
Zamani, S. A. Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
Zarandi, M.H. Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
Zolfaghari, M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Zolfaghari, M. Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]