Aftabi, M.R. Experimental Study of the Strength and Residual Stresses of the Friction Stir Welding Process of Explosive-Welded Al1050/Al2024/Al1050 [Volume 8, Issue 1, 2024, Pages 19-26]
Akbari, T. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024, Pages 73-87]
Alimirzaloo, V. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2024, Pages 69-81]
Alizadeh Kaklar, J. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2024, Pages 69-81]
B
Bahrami, A. Modeling and Investigation of Semi-elliptical Cracks in the Weld Seam of Pressurized Cylindrical Tanks [Volume 8, Issue 2, 2024, Pages 51-63]
Bakhshi-Jooybari, M. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2024, Pages 57-67]
D
Davar, A. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024, Pages 73-87]
Dehghani, B. Investigation of Effect of Hyaluronic Acid Containing Medicine on Frictional Behavior of Synovial Fluid [Volume 8, Issue 1, 2024, Pages 27-33]
E
Eskandari, H. Modeling and Investigation of Semi-elliptical Cracks in the Weld Seam of Pressurized Cylindrical Tanks [Volume 8, Issue 2, 2024, Pages 51-63]
Eskandari jam, J. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024, Pages 73-87]
F
Farkhondeh, A.H. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2024, Pages 57-67]
G
Gorji, H. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2024, Pages 57-67]
H
Hajizadeh, K. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2024, Pages 69-81]
Hajizadeh, K. The Effect of ECAP Process on the Microstructure and Mechanical Properties of AISI 1020 Plain Carbon Steel [Volume 8, Issue 2, 2024, Pages 41-50]
Heydari, H. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024, Pages 19-40]
Honarpisheh, M. Experimental Study of the Strength and Residual Stresses of the Friction Stir Welding Process of Explosive-Welded Al1050/Al2024/Al1050 [Volume 8, Issue 1, 2024, Pages 19-26]
Hoseini Vaez, S. R. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [Volume 8, Issue 2, 2024, Pages 1-17]
K
Karami Khorramabadi, M. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2024, Pages 1-18]
Komaz, A. A. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2024, Pages 1-18]
M
Mahdipour Jalilian, M. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2024, Pages 1-18]
Majzoobi, G.H. An Experimental Study of Static and Dynamic Behaviors of Kevlar in Fiber, Fabric and Kevlar/Epoxy Composites [Volume 8, Issue 2, 2024, Pages 65-72]
Mehanpour, H. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [Volume 8, Issue 2, 2024, Pages 1-17]
Mirnia, M.J. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2024, Pages 57-67]
Mohammad Zaheri, F. An Experimental Study of Static and Dynamic Behaviors of Kevlar in Fiber, Fabric and Kevlar/Epoxy Composites [Volume 8, Issue 2, 2024, Pages 65-72]
Mousaviamjad, S.S. NSSFEM: Nonlinear Spectral Stochastic Finite Element Method for Analysis of Structures with Elastoplastic Material [Volume 8, Issue 1, 2024, Pages 35-55]
P
Pasoodeh, B. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2024, Pages 69-81]
R
Rahimibondarabadi, H. NSSFEM: Nonlinear Spectral Stochastic Finite Element Method for Analysis of Structures with Elastoplastic Material [Volume 8, Issue 1, 2024, Pages 35-55]
Rajab, H. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024, Pages 73-87]
S
Shahbaz, M. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2024, Pages 69-81]
T
Tahmasbi, V. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024, Pages 19-40]
Torabi, A. Investigation of Effect of Hyaluronic Acid Containing Medicine on Frictional Behavior of Synovial Fluid [Volume 8, Issue 1, 2024, Pages 27-33]
V
Vanaki Farahan, A. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024, Pages 19-40]
Z
Zolfaghari, M. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024, Pages 19-40]
