Author Index

A

  • Aalami Aaleagha, M.E. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
  • Abdolazimzadeh, S. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
  • Abdullah, A. An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
  • Abedian, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
  • Ahmadi, O. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
  • Ahmadian, M.T. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
  • Ahmadpour, M. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
  • Alavi Nia, A. A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
  • Aliakbari, K. The Analysis of Light-duty Truck Diesel Engine Crankshaft Failure [Volume 2, Issue 2, 2018, Pages 11-17]
  • Aliakbari, K. Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
  • Amoorezaei, K. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
  • Amoorezayi, M. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
  • Arefi, M. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]
  • Arman, M. An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
  • Asadi, S. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
  • Assadollahi, M. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
  • Atrian, A. Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
  • Atrian, A. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]

B

  • Bahmani, F. Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
  • Bahrami, H. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
  • Bahrami, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Bahrami Ghalehjoogh, H. Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
  • Barati, F. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
  • Bayat, A. Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]
  • Bhad, P. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
  • Botshekanan Dehkordi, M. Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]
  • Botshekanan Dehkordi, M. Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]

C

  • Chahardoli, S. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]

D

  • Dabbagh, H. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
  • Dabbagh, H. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
  • Darudi, A. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
  • Deilami Azodi, H. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
  • Doryo, H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]

E

  • Ebrahimi, M. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
  • Eskandari-Naddaf, H. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
  • Esmaeilnia Omran, M. Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
  • Etehadi, S. Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]

F

  • Fallah, A. Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
  • Fallah, N. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
  • Farahinezhad, E. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
  • Fariba, F. A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
  • Farrahi, A. Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
  • Farrahi, G.H. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
  • Farshidi, M.H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
  • Feli, S. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]

G

  • Galehdari, S.A. Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
  • Ghasemi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Ghasemkhani, A. Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
  • Ghazizadeh, E. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
  • Gholami, M. Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]

H

  • Habibi, N. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
  • Habibi, N. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
  • Habibi, N. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
  • Haghighat, H. An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]
  • Hassani, A. Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]
  • Honarpisheh, M. A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
  • Honarpisheh, M. Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
  • Hoseini, S.H. Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
  • Hoseini Karani, A. Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
  • Hoseini Vaez, S.R. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
  • Hosseini, R. Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
  • Hosseinian, E. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
  • Hosseinian, S.M. Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
  • Hosseini Tabar, Z. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
  • Hosseinzadeh, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]

J

  • Jabbari Mostahsan, A.H. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
  • Jafari Fesharaki, J. Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
  • Jafarpour, V. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
  • Jahanban, M.R. Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
  • Janghorban, A. An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]

K

  • Kadkhodaei, M. The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
  • Karafi, M.R. An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
  • Karimi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Karimi, S. Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
  • Kazemi Nasrabadi, M. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
  • Khalkhali, A. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
  • Khalsa, L. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
  • Khanlari, H. A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
  • Khorshidi, K. Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
  • Khorshidi, K. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Khoshgoftar, M.J. Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]

L

  • Loghman, A. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]

M

  • Madadi, A. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
  • Mahdavi Shirazi, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Majzoobi, G.H. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
  • M. Alipour, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Matinfar, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Mazaheri, H. Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
  • Mazdak, S. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
  • Mirshabani, S.A. An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
  • Miyamoto, H. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
  • Moazam, M.A. Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
  • Mohammad Doost, H. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
  • Mohammad Hashemi, Y. The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
  • Mohammadzadeh, A. Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
  • Moharrami, R. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
  • Moharrami, R. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
  • Molaei, M. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
  • Moradikhah, R. Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]

N

  • Nakhodchi, S. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
  • Narooei, K. An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
  • Nemati, J. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
  • Nemati Nejad, M. Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
  • Nosoudi, A. Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
  • Nourbakhsh, S.H. Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
  • Nouri, A. Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
  • Nouri, A. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]

O

  • Omidi bidgoli, M. The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]

P

  • Pak, A. An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
  • Pirmohammad, S. Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]

R

  • Rabiee, H. Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
  • Rahmani, K. An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
  • Reza Kashyzadeh, K. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]

S

  • Saadatfar, M. Effect of Interlaminar Weak Bonding and Constant Magnetic Field on the Hygrothermal Stresses of a FG Hybrid Cylindrical Shell Using DQM [Volume 3, Issue 1, 2018, Pages 93-110]
  • Saadatfar, M. Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
  • Safari, M. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
  • Salimi, M.H. Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
  • Samawati, S. Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
  • Sedighi, M. Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
  • Seifi, R. Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
  • Selahi, E. Failure Study of Hybrid Bonded-bolted Composite Single and Double Lap Joints [Volume 3, Issue 2, 2019, Pages 37-46]
  • Shaban, M. Elasticity Solution for Static Analysis of Sandwich Structures with Sinusoidal Corrugated Cores [Volume 1, Issue 1, 2016, Pages 23-31]
  • Shaban, M. Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]
  • Shahani, A.R. Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
  • Shahbazi Karami, J. Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
  • Sharifi, E. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
  • Shariyat, M. The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
  • Sheykholeslami, M.R. The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
  • Shirazi, A. A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
  • Shooshtari, A. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
  • Sodagari, H. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
  • Sulaiman, S. Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]

T

  • Taghiloo, M.J. Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]

V

  • Vahdat Azad, N. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
  • Varghese, V. Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
  • Velayatparvardeh, M.H. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]

Y

  • Yuasa, M. Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]

Z

  • Zamani, R. Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]