Author Index

A

  • Aftabi, M.R. Experimental Study of the Strength and Residual Stresses of the Friction Stir Welding Process of Explosive-Welded Al1050/Al2024/Al1050 [Volume 8, Issue 1, 2023]
  • Akbari, T. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024]
  • Alimirzaloo, V. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2023]
  • Alizadeh Kaklar, J. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2023]

B

  • Bahrami, A. Modeling and Investigation of Semi-elliptical Cracks in the Weld Seam of Pressurized Cylindrical Tanks [Volume 8, Issue 2, 2024]
  • Bakhshi-Jooybari, M. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2023]

D

  • Davar, A. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024]
  • Dehghani, B. Investigation of Effect of Hyaluronic Acid Containing Medicine on Frictional Behavior of Synovial Fluid [Volume 8, Issue 1, 2023]

E

  • Eskandari, H. Modeling and Investigation of Semi-elliptical Cracks in the Weld Seam of Pressurized Cylindrical Tanks [Volume 8, Issue 2, 2024]
  • Eskandari jam, J. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024]

F

  • Farkhondeh, A.H. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2023]

G

  • Gorji, H. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2023]

H

  • Hajizadeh, K. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2023]
  • Hajizadeh, K. The Effect of ECAP Process on the Microstructure and Mechanical Properties of AISI 1020 Plain Carbon Steel [Volume 8, Issue 2, 2024]
  • Heydari, H. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024]
  • Honarpisheh, M. Experimental Study of the Strength and Residual Stresses of the Friction Stir Welding Process of Explosive-Welded Al1050/Al2024/Al1050 [Volume 8, Issue 1, 2023]
  • Hoseini Vaez, S. R. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [Volume 8, Issue 2, 2024]

K

  • Karami Khorramabadi, M. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2023]
  • Komaz, A. A. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2023]

M

  • Mahdipour Jalilian, M. Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths and Hardness of Friction Stir Processed Polycarbonate [Volume 8, Issue 1, 2023]
  • Majzoobi, G.H. An Experimental Study of Static and Dynamic Behaviors of Kevlar in Fiber, Fabric and Kevlar/Epoxy Composites [Volume 8, Issue 2, 2024]
  • Mehanpour, H. An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [Volume 8, Issue 2, 2024]
  • Mirnia, M.J. Electroplastic Effect on the Formability of Annealed AA6061 in Equibiaxial Tension Stress State [Volume 8, Issue 1, 2023]
  • Mohammad Zaheri, F. An Experimental Study of Static and Dynamic Behaviors of Kevlar in Fiber, Fabric and Kevlar/Epoxy Composites [Volume 8, Issue 2, 2024]
  • Mousaviamjad, S.S. NSSFEM: Nonlinear Spectral Stochastic Finite Element Method for Analysis of Structures with Elastoplastic Material [Volume 8, Issue 1, 2023]

P

  • Pasoodeh, B. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2023]

R

  • Rahimibondarabadi, H. NSSFEM: Nonlinear Spectral Stochastic Finite Element Method for Analysis of Structures with Elastoplastic Material [Volume 8, Issue 1, 2023]
  • Rajab, H. Design and Development of a Protection System Combining a Perforated Plate and Lightweight Composite Armor against 12.7 mm Caliber Threats [Volume 8, Issue 2, 2024]

S

  • Shahbaz, M. Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [Volume 8, Issue 1, 2023]

T

  • Tahmasbi, V. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024]
  • Torabi, A. Investigation of Effect of Hyaluronic Acid Containing Medicine on Frictional Behavior of Synovial Fluid [Volume 8, Issue 1, 2023]

V

  • Vanaki Farahan, A. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024]

Z

  • Zolfaghari, M. Investigating the Effect of Laser Parameters on Nano-Machining of Silicon Carbide by Response Surface Method Using Molecular Dynamics Simulation [Volume 8, Issue 2, 2024]