Abaie, M.M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Abedian, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
Akbaripanah, F. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
Aliakbari, K. Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
Amini, S. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Amoorezaei, K. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
Amoorezayi, M. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
Asgari, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Atrian, A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
Azadi, M. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
B
Bahmanabadi, H. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
Bahrami, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Barati, F. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
Behjat, B. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
Beiranvand, B. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
C
Chahardoli, S. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
D
Dabbagh, H. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
Davari, S. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
E
Ebrahimi, M. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
G
Galehdari, S.A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
Ghasemi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Ghiasvand, A. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
H
Habibi, N. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
Heydari, F. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Honarpisheh, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Hosseini Tabar, Z. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
Hosseinzadeh, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
J
Jafarpour, V. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
Jahani, A.R. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Jalilvand, M.M. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Joudaki, J. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
K
Karimi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Karimi, P. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Kashfi, M. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
Kazemi, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Kazemi Nasrabadi, M. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
Keypour, K. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
Kheradmandan, H. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Khorshidi, K. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
Komasi, M. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
M
Mahdavi Shirazi, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mahdipour Jalilian, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
Majzoobi, G.H. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
M. Alipour, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mansouri, H. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
Matinfar, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
Mazaheri, Y. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
Moharrami, R. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
Mostaan, H. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
Mozafari, H. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
N
Nourbakhsh, S.H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Nouri, A. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
Nourmohammadi, H. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
R
Rahmani, K. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
S
Saadatfar, M. Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
Safari, M. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
Saljoghi, H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
Shooshtari, A. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
Sodagari, H. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
T
Tahmasbi, V. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
V
Vahdat Azad, N. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
Velayatparvardeh, M.H. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
Z
Zolfaghari, M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
