A
-
Abaie, M.M.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Abedian, A.R.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
-
Akbaripanah, F.
Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
-
Aliakbari, K.
Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
-
Amini, S.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Amoorezaei, K.
Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
-
Amoorezayi, M.
A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
-
Asgari, M.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Atrian, A.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
-
Azadi, M.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
B
-
Bahmanabadi, H.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
-
Bahrami, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Barati, F.
Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
-
Behjat, B.
Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
-
Beiranvand, B.
Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
C
-
Chahardoli, S.
Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
D
-
Dabbagh, H.
Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
-
Davari, S.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
E
-
Ebrahimi, M.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
G
-
Galehdari, S.A.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
-
Ghasemi, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Ghiasvand, A.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
H
-
Habibi, N.
A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
-
Heydari, F.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Honarpisheh, M.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Hosseini Tabar, Z.
Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
-
Hosseinzadeh, A.R.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
J
-
Jafarpour, V.
Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
-
Jahani, A.R.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Jalilvand, M.M.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Joudaki, J.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
K
-
Karimi, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Karimi, P.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Kashfi, M.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
-
Kazemi, M.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Kazemi Nasrabadi, M.
Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
-
Keypour, K.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
-
Kheradmandan, H.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Khorshidi, K.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Komasi, M.
Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
M
-
Mahdavi Shirazi, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mahdipour Jalilian, M.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Majzoobi, G.H.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
-
M. Alipour, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mansouri, H.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Matinfar, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mazaheri, Y.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Moharrami, R.
Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
-
Mostaan, H.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
-
Mozafari, H.
Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
N
-
Nourbakhsh, S.H.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Nouri, A.
Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
-
Nourmohammadi, H.
Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
R
-
Rahmani, K.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
S
-
Saadatfar, M.
Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
-
Safari, M.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
-
Saljoghi, H.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Shooshtari, A.
Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
-
Sodagari, H.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
T
-
Tahmasbi, V.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
V
-
Vahdat Azad, N.
Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
-
Velayatparvardeh, M.H.
Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
Z
-
Zolfaghari, M.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
Your query does not match with any item