Author Index

A

  • Abaie, M.M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
  • Abedian, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
  • Akbaripanah, F. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
  • Aliakbari, K. Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
  • Amini, S. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
  • Amoorezaei, K. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
  • Amoorezayi, M. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
  • Asgari, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
  • Atrian, A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
  • Azadi, M. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]

B

  • Bahmanabadi, H. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
  • Bahrami, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Barati, F. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
  • Behjat, B. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
  • Beiranvand, B. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]

C

  • Chahardoli, S. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]

D

  • Dabbagh, H. Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
  • Davari, S. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]

E

  • Ebrahimi, M. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]

G

  • Galehdari, S.A. Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
  • Ghasemi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Ghiasvand, A. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]

H

  • Habibi, N. A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
  • Heydari, F. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
  • Honarpisheh, M. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
  • Hosseini Tabar, Z. Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
  • Hosseinzadeh, A.R. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]

J

  • Jafarpour, V. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
  • Jahani, A.R. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
  • Jalilvand, M.M. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
  • Joudaki, J. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]

K

  • Karimi, M. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Karimi, P. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
  • Kashfi, M. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
  • Kazemi, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
  • Kazemi Nasrabadi, M. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
  • Keypour, K. Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
  • Kheradmandan, H. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
  • Khorshidi, K. Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
  • Komasi, M. Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]

M

  • Mahdavi Shirazi, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Mahdipour Jalilian, M. Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
  • Majzoobi, G.H. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
  • M. Alipour, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Mansouri, H. Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
  • Matinfar, M. Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
  • Mazaheri, Y. Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
  • Moharrami, R. Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
  • Mostaan, H. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
  • Mozafari, H. Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]

N

  • Nourbakhsh, S.H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
  • Nouri, A. Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
  • Nourmohammadi, H. Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]

R

  • Rahmani, K. The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]

S

  • Saadatfar, M. Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
  • Safari, M. Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
  • Saljoghi, H. Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
  • Shooshtari, A. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
  • Sodagari, H. Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]

T

  • Tahmasbi, V. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]

V

  • Vahdat Azad, N. Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
  • Velayatparvardeh, M.H. Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]

Z

  • Zolfaghari, M. Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]