Abbasian Arani, A.A. Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
Afrasiab, H. An Analytical Approach for Modeling Fluid-structure Interaction Problems in Axisymmetric Domains [Volume 6, Issue 2, 2022, Pages 107-116]
Aghighi, M.S. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2022, Pages 47-60]
Akbaripanah, F. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
Akbarzadeh, S. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Ammar, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2022, Pages 47-60]
Ashrafi, M.J. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
Azadi, M. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
Azami, B. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Azarafza, R. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2022, Pages 139-156]
B
Bakhshi-Jooybari, M. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2022, Pages 29-46]
Balali Dehkordi, H.R. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Balali Dehkordi, R. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Barati, F. The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2022, Pages 61-66]
Barati, F. Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
Barkhordari, H. Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
D
Davar, A. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2022, Pages 139-156]
Dehghanian, Z. An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2022, Pages 13-28]
Doniavi, A. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
E
Ebrahimi, Z. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2022, Pages 79-88]
Esfahanian, M. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Esfandiari, M. The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2022, Pages 61-66]
Eskandari Jam, J. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2022, Pages 139-156]
G
Ghasemkhani, A. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2022, Pages 157-166]
Gorji, H. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2022, Pages 29-46]
H
Habibi, N. Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2022, Pages 1-12]
Hassani, A. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2022, Pages 67-77]
Hassani, A. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Heydari Pebdani, F. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
J
Jafari, S.S. An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2022, Pages 127-138]
Jaleh, B. Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
K
Kazemian, M. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2022, Pages 67-77]
L
Labbafian Mashhadi, A. Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2022, Pages 139-156]
M
Majzoobi, G.H. An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2022, Pages 127-138]
Masoumi, H. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2022, Pages 47-60]
Mazaheri, H. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2022, Pages 157-166]
Mirnia, M.J. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2022, Pages 29-46]
Mir Shafiee, S. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
Moazemi Goudarzi, A. Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2022, Pages 67-77]
Moazemi Goudarzi, A. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Mohammadi Dashtaki, P. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Moharrami, R. Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
Mokhtari, S.A. Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2022, Pages 105-125]
Mokhtarishirazabad, M. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
Moradi, M. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Moravej, M. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2022, Pages 79-88]
Morshedsolouk, F. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
Mousavi, S.H. Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2022, Pages 1-12]
Moussavi, E. Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
N
Naderi, A.A. Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2022, Pages 105-125]
Nourbakhsh, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2022, Pages 47-60]
Nourbakhsh, S.H. Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
R
Rabiee, A.H. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Ramezankhani, M. Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
S
Saadatfar, M. Transient Coupled Hygrothermal Stress Analysis of a Finite Length Functionally Graded Hollow Cylinder [Volume 6, Issue 1, 2022, Pages 89-103]
Safaei, A. Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2022, Pages 79-88]
Safari, M. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Salari, A. Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2022, Pages 47-60]
Salehebrahimnejad, B. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Salmani-Tehrani, M. An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2022, Pages 13-28]
Seyyedi, S.E. An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2022, Pages 29-46]
Shabanlou, E. Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
Shahbaz, M. Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
Soleymani, K. An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2022, Pages 157-166]
T
Tadi Beni, Y. Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
Tahmasbi, V. Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
Torabi, A. Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
Y
Yousefi Parchin Oliya, A. Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
