A
-
Abdi, M.
On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
-
Aghamohamadpour, M.
A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
-
Alidoosti, M.H.
Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
-
Alihemmati, J.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
-
Amini, R.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Arjmand, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Atrian, A.
Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
B
-
Babaei, S.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
-
Bakhshi-Jooybari, M.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Barati, F.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
E
-
Ebrahimi, R.
On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
-
Esfandiari, M.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
-
Eskandari, H.
Three-dimensional Fracture Analysis of Defected Tubes under Detonation [Volume 5, Issue 1, 2020, Pages 99-106]
-
Etemadi, M.
Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]
F
-
Feli, S.
Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]
G
-
Ganjiani, M.
A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
-
Ghahremani-Moghadam, D.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Ghasemkhani, A.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Golmakani, M.E.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
-
Gorji, H.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
H
-
Hajibagheri, H.R.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Hassanzadeh, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Hassanzadeh, M.
Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
-
Heidari, A.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Homayounfard, M.
A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
-
Hoseini, S.H.
A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
-
Hoseinzadeh-Amirdehi, M.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Hosseinipour, S.J.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Hosseinzadeh, A.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
K
-
Kadkhodayan, M.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
-
Karimi, M.
Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
-
Karimi, R.
Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
-
Korminejad, A.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
M
-
Mahdipour Jalilian, M.
Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]
-
Maraki, M.R.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Mazaheri, H.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Mohammadi, M.R.
Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
-
Moussavi Torshizi, S.E.
Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
N
-
Namdar, A.H.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Nassiri, A.
Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
-
Nourbakhsh, S.H.
Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
P
-
Pirmohammad, S.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
R
-
Rashidi, A.M.
Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]
S
-
Saadatfar, M.
Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
-
Sadidi, M.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Safari, M.
A Study on Main and Lateral Bending Angles in Laser Tube Bending Process [Volume 5, Issue 2, 2021, Pages 33-40]
-
Seifi, R.
Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
-
Shahani, A.R.
Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
-
Sharifi Torki, H.
Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
-
Shavalipour, A.
Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
-
Sheikhi Azqandi, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Sobhi, S.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
-
Soltanimaleki, A.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
T
-
Tadi beni, Y.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
-
Torabi, A.
Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
Y
-
Yousefi, A.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
Z
-
Zamani, S. A.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Zarandi, M.H.
Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
Your query does not match with any item