Journal of Stress Analysis - Articles in Press

Articles in Press: ALL Accepted Manuscript Corrected Proof

Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell

Volume 3, Issue 2, March 2019, Pages 29-35

10.22084/jrstan.2019.18220.1083

H. Mazaheri; A. Ghasemkhani

Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach

Articles in Press, Accepted Manuscript, Available Online from 26 June 2023

10.22084/jrstan.2023.26558.1216

Z. Naghibi; J. Payandehpeyman; K. Moradi

View Article

Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures

Volume 4, Issue 2, March 2020, Pages 29-44

10.22084/jrstan.2020.20090.1114

H. Bahmanabadi; M. Azadi; K. Keypour

Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model

Volume 2, Issue 2, March 2018, Pages 31-42

10.22084/jrstan.2018.15463.1039

H. Bahrami Ghalehjoogh; S.H. Hoseini

Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading

Volume 1, Issue 1, September 2016, Pages 33-41

10.22084/jsa.2017.11600.1008

S. Pirmohammad; A. Bayat

An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material

Volume 1, Issue 2, March 2017, Pages 35-41

10.22084/jsa.2017.11676.1009

H. Haghighat; A. Janghorban

Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory

Volume 2, Issue 1, September 2017, Pages 35-49

10.22084/jrstan.2017.13316.1021

A. Hassani; M. Gholami

An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction

Volume 3, Issue 1, September 2018, Pages 35-45

10.22084/jrstan.2018.16240.1048

G.H. Majzoobi; K. Rahmani; A. Atrian

Failure Study of Hybrid Bonded-bolted Composite Single and Double Lap Joints

Volume 3, Issue 2, March 2019, Pages 37-46

10.22084/jrstan.2019.17471.1072

E. Selahi

Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression

Volume 4, Issue 1, September 2019, Pages 43-52

10.22084/jrstan.2019.18088.1077

H. Dabbagh; K. Amoorezaei

Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets

Articles in Press, Accepted Manuscript, Available Online from 26 June 2023

10.22084/jrstan.2023.26639.1218

M. Honarpisheh; M. Honarpisheh; M. Mohammadimehr

View Article

An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test

Volume 1, Issue 1, September 2016, Pages 43-54

10.22084/jsa.2017.10529.1001

M. Arman; K. Narooei

An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer

Volume 1, Issue 2, March 2017, Pages 43-53

10.22084/jsa.2017.12630.1014

A. Pak; A. Abdullah

Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens

Volume 2, Issue 2, March 2018, Pages 43-53

10.22084/jrstan.2018.15449.1037

R. Hosseini; R. Seifi

Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging

Volume 4, Issue 2, March 2020, Pages 45-53

10.22084/jrstan.2020.20106.1115

H. Mozafari; F. Akbaripanah

Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys

Volume 3, Issue 1, September 2018, Pages 47-51

10.22084/jrstan.2018.16833.1053

M.H. Farshidi; H. Doryo; M. Yuasa; H. Miyamoto

An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations

Volume 3, Issue 2, March 2019, Pages 47-58

10.22084/jrstan.2019.16120.1047

M.R. Karafi; S.A. Mirshabani

Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy

Volume 2, Issue 1, September 2017, Pages 51-56

10.22084/jrstan.2017.14013.1022

S.H. Nourbakhsh; A. Atrian

A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique

Volume 4, Issue 1, September 2019, Pages 53-63

10.22084/jrstan.2019.18275.1085

N. Habibi; M. Amoorezayi

Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells

Articles in Press, Accepted Manuscript, Available Online from 26 June 2023

10.22084/jrstan.2023.26879.1223

R. Azarafza; Z. Rafei; A. Davar; M. Ghadimi

View Article

Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup

Volume 3, Issue 1, September 2018, Pages 53-60

10.22084/jrstan.2018.16084.1046

M. Molaei; M. Safari; H. Deilami Azodi; J. Shahbazi Karami

Improvement in Mechanical Properties of Titanium Deformed by ECAE Process

Volume 1, Issue 1, September 2016, Pages 55-64

10.22084/jsa.2017.11151.1007

J. Nemati; S. Sulaiman; A. Khalkhali

Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading

Volume 1, Issue 2, March 2017, Pages 55-61

10.22084/jsa.2017.12922.1020

M.H. Salimi; M. Assadollahi; S. Nakhodchi

Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses

Volume 2, Issue 2, March 2018, Pages 55-67

10.22084/jrstan.2018.15081.1034

P. Bhad; V. Varghese; L. Khalsa

Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching

Volume 4, Issue 2, March 2020, Pages 55-67

10.22084/jrstan.2020.20022.1110

M. Komasi; B. Beiranvand

Journal Archive

Volume 6 (2021-22)

Volume 5 (2020-21)

Volume 4 (2019-20)

Volume 3 (2018-19)

Volume 2 (2017-18)

Volume 1 (2016-17)