A
-
Aalami Aaleagha, M.E.
Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
-
Abaie, M.M.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Abbasian Arani, A.A.
Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
-
Abdi, M.
On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
-
Abdolalian, H.
Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
-
Abdolazimzadeh, S.
The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
-
Abdullah, A.
An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
-
Abedian, A.R.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
-
Afrasiab, H.
An Analytical Approach for Modeling Fluid-structure Interaction Problems in Axisymmetric Domains [Volume 6, Issue 2, 2022, Pages 107-116]
-
Aghaei, Mahdi
Fatigue Endurance Optimization of a Steam Turbine Blade Curved Fir-Tree Root [(Articles in Press)]
-
Aghamohamadpour, M.
A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
-
Aghighi, M.S.
Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
-
Ahmad Abdolabas, K.
Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths of Friction Stir Processed Polycarbonate [(Articles in Press)]
-
Ahmadi, O.
Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
-
Ahmadian, M.T.
The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
-
Ahmadi Yegane, M.
The Effect of the Constrained Groove Pressing Process on Mechanical Properties of Thin Pure Copper Sheets [(Articles in Press)]
-
Ahmadpour, M.
A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
-
Akbaripanah, F.
Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
-
Akbaripanah, F.
Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
-
Akbarzadeh, S.
Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
-
Alavi Nia, A.
A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
-
Aliakbari, K.
The Analysis of Light-duty Truck Diesel Engine Crankshaft Failure [Volume 2, Issue 2, 2018, Pages 11-17]
-
Aliakbari, K.
Failure Analysis of Base Plate Bolts of Radial Forging Machine [Volume 4, Issue 1, 2019, Pages 89-98]
-
Alidoosti, M.H.
Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
-
Alihemmati, J.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
-
Alimirzaloo, V.
Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
-
Alipoor, M.
Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
-
Alizadeh Kaklar, J.
Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
-
Amini, R.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Amini, S.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Ammar, A.
Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
-
Amoorezaei, K.
Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
-
Amoorezayi, M.
A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
-
Arabi, H.
Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
-
Arefi, M.
The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]
-
Arjmand, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Arman, M.
An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
-
Asadi, S.
Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
-
Asgari, M.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Ashrafi, M.J.
Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
-
Assadollahi, M.
Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
-
Atrian, A.
Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
-
Atrian, A.
An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
-
Atrian, A.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
-
Atrian, A.
Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
-
Azadi, M.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
-
Azadi, M.
Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
-
Azami, B.
Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
-
Azarafza, R.
Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
-
Azarafza, R.
Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
B
-
Babaei, S.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
-
Bahmanabadi, H.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
-
Bahmani, F.
Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
-
Bahrami, H.
A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
-
Bahrami, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Bahrami Ghalehjoogh, H.
Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
-
Bakhshi-Jooybari, M.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Bakhshi-Jooybari, M.
An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
-
Balali Dehkordi, H.R.
Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
-
Balali Dehkordi, R.
Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
-
Barati, F.
Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
-
Barati, F.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
-
Barati, F.
The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2021, Pages 61-66]
-
Barati, F.
Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
-
Barkhordari, H.
Investigation of Elastic Leak in Rectangular Hydrogel Seals [Volume 6, Issue 2, 2022, Pages 67-74]
-
Bayat, A.
Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]
-
Bayati Chaleshtari, M. H.
Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
-
Behjat, B.
Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
-
Beiranvand, B.
Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
-
Bhad, P.
Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
-
Botshekanan Dehkordi, M.
Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]
-
Botshekanan Dehkordi, M.
Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]
-
Botshekanan Dehkordi, M.
Nonlinear Quasi-static Analysis of SMA Curved Beams [(Articles in Press)]
C
-
Chahardoli, S.
Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
-
Cheraghback, A.
Nonlinear Quasi-static Analysis of SMA Curved Beams [(Articles in Press)]
D
-
Dabbagh, H.
Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
-
Dabbagh, H.
Stress-strain Relationship for Steel Fiber-reinforced Lightweight Aggregate Concrete under Uniaxial Compression [Volume 4, Issue 1, 2019, Pages 43-52]
-
Darudi, A.
Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
-
Davar, A.
Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
-
Davar, A.
Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
-
Davari, S.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
-
Dehghanian, Z.
An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2021, Pages 13-28]
-
Deilami Azodi, H.
Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
-
Doniavi, A.
Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
-
Doryo, H.
Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
E
-
Ebrahimi, M.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
-
Ebrahimi, R.
On the Tool Stress Analysis in Twin Parallel Channel Angular Extrusion [Volume 5, Issue 2, 2021, Pages 53-61]
-
Ebrahimi, Z.
Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
-
Esfahanian, M.
Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
-
Esfandiari, M.
The Effect of 2% SiO2 Nanopowder on Mechanical Behavior of Mg AZ31 [Volume 5, Issue 1, 2020, Pages 69-76]
-
Esfandiari, M.
The Effect of Multi-walled Carbon Nanotubes, as the Reinforcement Phase, on the Hardness and Bending Strength of Aluminum Alloy 7075 [Volume 6, Issue 1, 2021, Pages 61-66]
-
Eskandari, H.
Three-dimensional Fracture Analysis of Defected Tubes under Detonation [Volume 5, Issue 1, 2020, Pages 99-106]
-
Eskandari Jam, J.
Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
-
Eskandari-Naddaf, H.
Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
-
Esmaeilnia Omran, M.
Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
-
Etehadi, S.
Effect of Axial Stresses of the Core on the Free Vibration Response of a Sandwich Beam with FG Carbon Nanotube Faces and Stiff and Flexible Cores [Volume 3, Issue 2, 2019, Pages 1-14]
-
Etemadi, M.
Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]
F
-
Fallah, A.
Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
-
Fallah, N.
Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
-
Farahinezhad, E.
Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
-
Farhadi Bansouleh, S.
Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]
-
Fariba, F.
A New Method for Correcting the Stress-Strain Curves after Bulging in Metals [Volume 1, Issue 2, 2017, Pages 13-23]
-
Farrahi, A.
Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
-
Farrahi, G.H.
The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
-
Farshidi, M.H.
Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
-
Feli, S.
Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
-
Feli, S.
Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]
G
-
Galehdari, S.A.
Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
-
Galehdari, S.A.
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions [Volume 4, Issue 2, 2020, Pages 81-91]
-
Ganjiani, M.
A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
-
Ghadimi, M.
Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
-
Ghahremani-Moghadam, D.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Ghasemi, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Ghasemkhani, A.
Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
-
Ghasemkhani, A.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Ghasemkhani, A.
An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
-
Ghazizadeh, E.
Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
-
Ghiasvand, A.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Gholami, M.
Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]
-
Golmakani, M.E.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
-
Gorji, H.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Gorji, H.
An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
H
-
Habibi, N.
Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
-
Habibi, N.
Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
-
Habibi, N.
A 3D Simulation of Bolted Joint and Fatigue Life Estimation Using Critical Distance Technique [Volume 4, Issue 1, 2019, Pages 53-63]
-
Habibi, N.
Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2021, Pages 1-12]
-
Haghighat, H.
An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]
-
Hajibagheri, H.R.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Hajizadeh, K.
Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
-
Hashemi, Mehdi
Fatigue Endurance Optimization of a Steam Turbine Blade Curved Fir-Tree Root [(Articles in Press)]
-
Hassani, A.
Analytical and Numerical Bending Solutions for Thermoelastic Functionally Graded Rotating Disks with Nonuniform Thickness Based on Mindlin’s Theory [Volume 2, Issue 1, 2017, Pages 35-49]
-
Hassani, A.
Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
-
Hassani, A.
Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
-
Hassanzadeh, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Hassanzadeh, M.
Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
-
Heidari, A.
An Experimental Determination of Fracture Toughness of API X46 Steel Pipeline Using Single Edge Bend and Crack Assessments by Failure Assessment Diagrams [Volume 5, Issue 2, 2021, Pages 41-52]
-
Heidari, H.R.
Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
-
Heydari, F.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Heydari, H.
Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
-
Heydari Pebdani, F.
Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
-
Homayounfard, M.
A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications [Volume 5, Issue 2, 2021, Pages 63-72]
-
Honarpisheh, M.
A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
-
Honarpisheh, M.
Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
-
Honarpisheh, M.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Honarpisheh, M.
Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
-
Honarpisheh, M.
Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
-
Hooshmandi, A.H.
Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
-
Hoseini, S.H.
Ductile Fracture Analysis of High-strength Steel Bars Using Micromechanical GTN Model [Volume 2, Issue 2, 2018, Pages 31-42]
-
Hoseini, S.H.
A Numerical Method to Analyze the Brittle Fracture Using Phase-field Theory [Volume 5, Issue 1, 2020, Pages 1-10]
-
Hoseini Karani, A.
Span Length Effects on the Progressive Collapse Behaviour in Concrete Structures [Volume 3, Issue 1, 2018, Pages 81-91]
-
Hoseini Vaez, S. R.
An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [(Articles in Press)]
-
Hoseini Vaez, S.R.
Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
-
Hoseinzadeh-Amirdehi, M.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Hosseini, R.
Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
-
Hosseinian, E.
Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
-
Hosseinian, S.M.
Assessing Reliability of Bending of Concrete Beams Exposed to Freeze-thaw Conditions Based on Compressive Stress Limit Reduction [Volume 3, Issue 2, 2019, Pages 83-93]
-
Hosseinipour, S.J.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Hosseini Tabar, Z.
Effect of SiC Particles on Fatigue Life of AL-Matrix Composites [Volume 4, Issue 1, 2019, Pages 73-88]
-
Hosseinzadeh, A.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Hosseinzadeh, A.R.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
J
-
Jabbari Mostahsan, A.H.
Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
-
Jafari, S.S.
An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2021, Pages 127-138]
-
Jafari Fesharaki, J.
Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
-
Jafarpour, V.
Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
-
Jahanban, M.R.
Evaluation Effects of Modeling Parameters on the Temperature Fields and Residual Stresses of Butt-Welded Stainless Steel Pipes [Volume 1, Issue 2, 2017, Pages 25-33]
-
Jahani, A.R.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Jaleh, B.
Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
-
Jalilvand, M.M.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Janghorban, A.
An Analytical Model for Long Tube Hydroforming in a Square Cross-Section Die Considering Anisotropic Effects of the Material [Volume 1, Issue 2, 2017, Pages 35-41]
-
Joudaki, J.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
-
Joudaki, J.
Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]
K
-
Kadkhodaei, M.
The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
-
Kadkhodayan, M.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
-
Kadkhodayan, M.
The Effect of the Constrained Groove Pressing Process on Mechanical Properties of Thin Pure Copper Sheets [(Articles in Press)]
-
Karafi, M.R.
An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
-
Karami Khorramabadi, M.
Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
-
Karami Khorramabadi, M.
Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths of Friction Stir Processed Polycarbonate [(Articles in Press)]
-
Karimi, M.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Karimi, M.
Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
-
Karimi, P.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Karimi, R.
Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
-
Karimi, S.
Using Topology Optimization to Reduce Stress Concentration Factor in a Plate with a Hole [Volume 3, Issue 2, 2019, Pages 109-116]
-
Kashfi, M.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
-
Kazemi, M.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Kazemian, M.
Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
-
Kazemi Nasrabadi, M.
Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
-
Keypour, K.
Continuum Damage Mechanics for Creep Lifetime Estimation in Polymer Matrix Composites at Various Temperatures [Volume 4, Issue 2, 2020, Pages 29-44]
-
Khalkhali, A.
Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
-
Khalsa, L.
Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
-
Khanlari, H.
A Numerical Study on the Residual Stress Measurement Accuracy Using Inverse Eigenstrain Method [Volume 2, Issue 2, 2018, Pages 1-10]
-
Kheradmandan, H.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Khorshidi, K.
Effect of Exponential Stress Resultant on Buckling Response of Functionally Graded Rectangular Plates [Volume 2, Issue 1, 2017, Pages 27-33]
-
Khorshidi, K.
Effects of Couple-stress Resultants on Thermo-electro-mechanical Behavior of Vibrating Piezoelectric Micro-plates Resting on Orthotropic Foundation [Volume 4, Issue 1, 2019, Pages 125-136]
-
Khoshgoftar, M.J.
Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]
-
Komasi, M.
Study of Hydraulic Failure Mechanism in the Core of Eyvashan Earth Dam with the Effect of Pore Water Pressure and Arching [Volume 4, Issue 2, 2020, Pages 55-67]
-
Korminejad, A.
Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment [Volume 5, Issue 2, 2021, Pages 73-82]
L
-
Labbafian Mashhadi, A.
Low-Velocity Impact Response Analysis of Laminated Composite Cylindrical Shells Subjected to Combined Pre-Loads [Volume 6, Issue 1, 2021, Pages 139-156]
-
Loghman, A.
The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]
M
-
Madadi, A.
Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
-
Mahdavi Shirazi, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mahdipour Jalilian, M.
Investigation of Exerted Force on Roller and Roller Width Effects on Residual Stresses in Direct and Indirect Rolling of FSW of SU304 Steel [Volume 4, Issue 2, 2020, Pages 115-125]
-
Mahdipour Jalilian, M.
Experimental Investigation of Impact Damage Response of Sandwich Panels with Epoxy/woven-Fiberglass/nano-Silica Composite Face-sheets [Volume 5, Issue 1, 2020, Pages 57-67]
-
Mahdipour Jalilian, M.
Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite [(Articles in Press)]
-
Mahdipour Jalilian, M.
Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths of Friction Stir Processed Polycarbonate [(Articles in Press)]
-
Mahmoodpour, E.
Nonlinear Free Vibrations of a Carbon Nanobeam Carrying an Elastically Mounted Concentrated Mass [(Articles in Press)]
-
Majzoobi, G.H.
An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
-
Majzoobi, G.H.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
-
Majzoobi, G.H.
An Investigation into the Effect of Strain Rate on Damage Evolution in Pure Copper Using a Modified Bonora Model [Volume 6, Issue 1, 2021, Pages 127-138]
-
M. Alipour, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mansouri, H.
Investigation of Residual Stress in the Ultrasonic Assisted Constraint Groove Pressing Process of Copper Sheets [Volume 4, Issue 2, 2020, Pages 107-114]
-
Maraki, M.R.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Masoumi, H.
Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
-
Matinfar, M.
Analysis of Bi-directional FG Porous Sandwich Beams in Hygrothermal Environment Resting on Winkler/Pasternak Foundation, Based on the Layerwise Theory and Chebyshev Tau Method [Volume 4, Issue 1, 2019, Pages 137-150]
-
Mazaheri, H.
Analytical and Numerical Study of the Swelling Behavior in Functionally Graded Temperature-sensitive Hydrogel Shell [Volume 3, Issue 2, 2019, Pages 29-35]
-
Mazaheri, H.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Mazaheri, H.
An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
-
Mazaheri, Y.
Effect of FSP Pass Number on the Tribological Behavior of AZ31 Magnesium Alloy [Volume 4, Issue 2, 2020, Pages 9-18]
-
Mazdak, S.
The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
-
Mehanpour, H.
An Efficient Optimal Analysis Approach to Reliability-Based Design Optimization of Symmetric Skeletal Structures [(Articles in Press)]
-
Mirnia, M.J.
An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
-
Mirshabani, S.A.
An Analytical Approach to Design of Ultrasonic Transducers Considering Lateral Vibrations [Volume 3, Issue 2, 2019, Pages 47-58]
-
Mir Shafiee, S.
Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
-
Miyamoto, H.
Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
-
Moazam, M.A.
Presentation of Calibration Coefficient to Measure NonUniform Residual Stresses by the Integral Ring-core Method [Volume 3, Issue 2, 2019, Pages 15-28]
-
Moazemi Goudarzi, A.
Mechanical Integrity Reduction in the Polymeric-pulsatile-pressurized Vessel under Strain-induced Degradation Model [Volume 6, Issue 1, 2021, Pages 67-77]
-
Moazemi Goudarzi, A.
Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
-
Mohammad Doost, H.
Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
-
Mohammad Hashemi, Y.
The Effects of Geometric Parameters Under Small and Large Deformations on Dissipative Performance of Shape Memory Alloy Helical Springs [Volume 3, Issue 1, 2018, Pages 69-79]
-
Mohammadi, M.
Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
-
Mohammadi, M.R.
Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
-
Mohammadi Dashtaki, P.
Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
-
Mohammadimehr, M.
Experimental Analysis of the Effects of Plasma Cutting Parameters on Residual Stress Distribution by the Contour Method on St37 Sheets [(Articles in Press)]
-
Mohammadzadeh, A.
Damage Identification in Large-scale Double-layer Truss Structures Via a Two-stage Approach [Volume 3, Issue 2, 2019, Pages 95-107]
-
Moharrami, R.
Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
-
Moharrami, R.
Experimental Study of Residual Stresses Due to Inconel X-750 Creep-feed Grinding by the Electropolishing Layer Removal Technique [Volume 4, Issue 1, 2019, Pages 65-71]
-
Moharrami, R.
Numerical Study on the Effect of Biaxial Surface Stresses on the Measurement Accuracy of Mechanical Properties in A516 Using Indentation [Volume 6, Issue 2, 2022, Pages 47-57]
-
Mokhtari, S.A.
Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2021, Pages 105-125]
-
Mokhtarishirazabad, M.
Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
-
Molaei, M.
Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
-
Moradi, K.
Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
-
Moradi, M.
Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
-
Moradikhah, R.
Evaluation of SIF in FGM Thick-walled Cylindrical Vessel [Volume 2, Issue 1, 2017, Pages 57-68]
-
Moravej, M.
Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
-
Morshedsolouk, F.
Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
-
Mostaan, H.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
-
Mousavi, S.H.
Effect of the Bolt Layout and Distance on Strength of the Composite Joints [Volume 6, Issue 1, 2021, Pages 1-12]
-
Moussavi, E.
Design and Simulation of a Laser Measurement Technique in Split Hopkinson Pressure Bar Test [Volume 6, Issue 2, 2022, Pages 75-83]
-
Moussavi Torshizi, S.E.
Effect of Shot Peening Parameters of AISI 420 on Stress and Roughness: An Analysis Using the Finite Element Method and the Response Surface Methodology [Volume 5, Issue 1, 2020, Pages 107-120]
-
Mozafari, H.
Changes in Grain Size, Texture, and Mechanical Properties of AZ31/(TiO2)p Nanocomposites Processed by Isothermal Multidirectional Forging [Volume 4, Issue 2, 2020, Pages 45-53]
N
-
Naderi, A.A.
Effect of Process Parameters on Thin-wall Products under High-frequency Vibrating Tools, Case Study: Ultrasonic Assisted Deep Drawing Process [Volume 6, Issue 1, 2021, Pages 105-125]
-
Naghibi, Z.
Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
-
Nakhodchi, S.
Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
-
Namdar, A.H.
Behavior of Photo-thermal Sensitive Polyelectrolyte Hydrogel Micro-valve: Analytical and Numerical Approaches [Volume 5, Issue 1, 2020, Pages 21-30]
-
Narooei, K.
An Investigation to Nonlinear Elastic Behavior of Pericardium Using Uniaxial Tensile Test [Volume 1, Issue 1, 2016, Pages 43-54]
-
Nassiri, A.
Experimental Investigation of the Effect of Circular Cutout Trigger on Energy Absorption of Three-layered Steel/Polypropylene/Aluminum Deep Drawn Cups [Volume 5, Issue 2, 2021, Pages 1-10]
-
Nemati, J.
Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
-
Nemati Nejad, M.
Evaluation of Bond Strength of Reinforcement in Concrete Containing Fibers, Micro-silica and Nano-silica [Volume 3, Issue 1, 2018, Pages 11-19]
-
Nosoudi, A.
Linear Numerical Stress Analysis of Concrete Specimens under Different Direct Tension Test Setups [Volume 1, Issue 2, 2017, Pages 1-12]
-
Nourbakhsh, A.
Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
-
Nourbakhsh, S.H.
Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy [Volume 2, Issue 1, 2017, Pages 51-56]
-
Nourbakhsh, S.H.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Nourbakhsh, S.H.
Numerical Investigation of Energy Absorption of Thinwalled Combined Geometry under Axial and Oblique Loading [Volume 5, Issue 2, 2021, Pages 101-108]
-
Nourbakhsh, S.H.
Effects of the Geometric Profile of Twist Channel Angular Pressing (TCAP) on the Deformation Behaviors and Microstructure Evolution of AL7050 Alloy [Volume 6, Issue 2, 2022, Pages 85-95]
-
Nouri, A.
Coupled Thermoelastic Analysis of Semi-elliptical Crack in Thick-walled Cylinder Considering Green-Lindsay and Green-Naghdi Type II Theories [Volume 2, Issue 1, 2017, Pages 11-26]
-
Nouri, A.
Ductile Failure Prediction of Friction Stir Welded AA7075-T6 Aluminum Alloy Weakened by a V-notch [Volume 4, Issue 1, 2019, Pages 113-124]
-
Nourmohammadi, H.
Static Analysis of Functionally Graded Piezoelectric Plates under Electro-thermo-mechanical Loading Using a Meshfree Method Based on RPIM [Volume 4, Issue 2, 2020, Pages 93-106]
O
-
Omidi bidgoli, M.
The Effect of Grading Index on Two-dimensional Stress and Strain Distribution of FG Rotating Cylinder Resting on a Friction Bed Under Thermomechanical Loading [Volume 3, Issue 2, 2019, Pages 75-82]
P
-
Pak, A.
An Approach to Designing a Dual Frequency Piezoelectric Ultrasonic Transducer [Volume 1, Issue 2, 2017, Pages 43-53]
-
Pasoodeh, B.
Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
-
Payandehpeyman, J.
Parametric Investigation of Carbon Nanotube-Based Nanomechanical Mass Sensors Using Structural Mechanics and an Artificial Neural Network Approach [(Articles in Press)]
-
Pirmohammad, S.
Finite Element Analysis of a New Specimen for Conducting Fracture Tests under Mixed Mode I/III Loading [Volume 1, Issue 1, 2016, Pages 33-41]
-
Pirmohammad, S.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
R
-
Rabiee, A.H.
Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
-
Rabiee, H.
Modal Numerical Analysis of Helicopter Rotor Sample Using Holzer-Myklestad Method [Volume 3, Issue 1, 2018, Pages 111-121]
-
Rafei, Z.
Investigation of the Effect of Cracks on Vibrational Properties of Composite Cylindrical Shells [(Articles in Press)]
-
Rahmani, K.
An Experimental Investigation into Wear Resistance of Mg-SiC Nanocomposite Produced at High Rate of Compaction [Volume 3, Issue 1, 2018, Pages 35-45]
-
Rahmani, K.
The Effect of Pre-compaction on Properties of Mg/SiC Nanocomposites Compacted at High Strain Rates [Volume 4, Issue 2, 2020, Pages 19-28]
-
Ramezankhani, M.
Experimental and Numerical Crushing Behavior of Sandwich Structures with Two-layered Bi-directional Corrugated Core and Single-layered Bi-directional Interconnected Corrugated Core [Volume 6, Issue 2, 2022, Pages 123-130]
-
Rashidi, A.M.
Shear Strain Distribution in Cylindrical Samples Subjected to Deformation by Various Routes of Equal Channel Angular Pressing [Volume 5, Issue 2, 2021, Pages 21-31]
-
Reza Kashyzadeh, K.
The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
S
-
Saadatfar, M.
Effect of Interlaminar Weak Bonding and Constant Magnetic Field on the Hygrothermal Stresses of a FG Hybrid Cylindrical Shell Using DQM [Volume 3, Issue 1, 2018, Pages 93-110]
-
Saadatfar, M.
Effect of Hygrothermal Environmental Conditions on the Time-dependent Creep Response of Functionally Graded Magneto-electro-elastic Hollow Sphere [Volume 4, Issue 1, 2019, Pages 27-41]
-
Saadatfar, M.
Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
-
Saadatfar, M.
Transient Coupled Hygrothermal Stress Analysis of a Finite Length Functionally Graded Hollow Cylinder [Volume 6, Issue 1, 2021, Pages 89-103]
-
Sadidi, M.
Investigation of the Notch Angle Effect on Charpy Fracture Energy in 7075-T651 Aluminum Alloy [Volume 5, Issue 2, 2021, Pages 123-135]
-
Safaei, A.
Weldability Investigation of Super-duplex Steel Hollow Pipes Welded by Gas Tungsten Arc Welding Process [Volume 6, Issue 1, 2021, Pages 79-88]
-
Safarabadi Farahani, M.
Analytical Methods for the Plane Problem in Piezoelectric Plate Containing a Polygonal Hole [(Articles in Press)]
-
Safari, M.
Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
-
Safari, M.
Experimental Investigation of Weld Quality for Dissimilar Welding of AA6061-T6/AA7075-T6 Aluminum Alloys [Volume 4, Issue 2, 2020, Pages 69-80]
-
Safari, M.
A Study on Main and Lateral Bending Angles in Laser Tube Bending Process [Volume 5, Issue 2, 2021, Pages 33-40]
-
Safari, M.
Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
-
Safari, M.
Experimental Investigation of Curvature Uniformity in the Laser Bending Process [(Articles in Press)]
-
Salari, A.
Effect of Thermophoresis and Brownian Motion on Natural Convection of Yield Stress Nanofluids [Volume 6, Issue 1, 2021, Pages 47-60]
-
Salehebrahimnejad, B.
Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
-
Salimi, M.H.
Failure Mechanism and Ultimate Strength of Friction Stir Spot Welded Al-5052 Joints under Tensile-shear Loading [Volume 1, Issue 2, 2017, Pages 55-61]
-
Saljoghi, H.
Numerical Investigation of the Cross-section and Twist Extrusion Die Angle on the Distribution of Plastic Strain and Microstructure of Al7050 Alloy [Volume 4, Issue 2, 2020, Pages 1-8]
-
Salmani-Tehrani, M.
An Analytical Solution to the Problem of Thin-walled Pressure Vessel with Circular-arc Cross-section [Volume 6, Issue 1, 2021, Pages 13-28]
-
Samawati, S.
Creep Analysis of the FGM Cylinder under Steady-state Symmetric Loading [Volume 1, Issue 1, 2016, Pages 9-21]
-
Sedighi, M.
Investigation of Hot-extrusion Effect on Microhardness, Microstructure and Corrosion Behavior of Magnesium-based Bio-composites [Volume 3, Issue 2, 2019, Pages 69-73]
-
Seifi, R.
Influence of Hardening on the Cyclic Plastic Zone Around Crack Tip in Pure Copper CT Specimens [Volume 2, Issue 2, 2018, Pages 43-53]
-
Seifi, R.
Fatigue Life Prediction of Notched Components after Plastic Overload Using Theory of Critical Distance [Volume 5, Issue 2, 2021, Pages 11-20]
-
Selahi, E.
Failure Study of Hybrid Bonded-bolted Composite Single and Double Lap Joints [Volume 3, Issue 2, 2019, Pages 37-46]
-
Seyyedi, S.E.
An Experimental and Numerical Investigation of Deformation Mechanics on Hole-Flanging Process of AA6061-T6 Sheets through Single-Point Incremental Forming [Volume 6, Issue 1, 2021, Pages 29-46]
-
Shaban, M.
Elasticity Solution for Static Analysis of Sandwich Structures with Sinusoidal Corrugated Cores [Volume 1, Issue 1, 2016, Pages 23-31]
-
Shaban, M.
Mixed Elastic Modeling of Multilayer Composite Plates by Using Dimension Reduction Approach [Volume 3, Issue 2, 2019, Pages 59-68]
-
Shabanlou, E.
Laser Treatment of Pure Titanium Surface in Various Irradiated Media: Investigating Hardness Properties of Ablated Ti Surface [Volume 6, Issue 2, 2022, Pages 117-122]
-
Shahani, A.R.
Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-shear Configuration [Volume 3, Issue 1, 2018, Pages 61-68]
-
Shahani, A.R.
Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
-
Shahbaz, M.
Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm [Volume 6, Issue 2, 2022, Pages 97-105]
-
Shahbaz, M.
Analysis of Influences of Parameters on Hydrostatic Compressive Stress in Cyclic Extrusion Compression Angular Pressing for CP-Ti [(Articles in Press)]
-
Shahbazi Karami, J.
Experimental and Numerical Investigations of Hydromechanical Deep Drawing of a Bilayer Conical Cup [Volume 3, Issue 1, 2018, Pages 53-60]
-
Sharifi, E.
The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
-
Sharifi Torki, H.
Analytical Solution of the Coupled Dynamic Thermoelasticity Problem in a Hollow Cylinder [Volume 5, Issue 1, 2020, Pages 121-134]
-
Shariyat, M.
The Role of Wheel Alignment Over the Fatigue Damage Accumulation in Vehicle Steering Knuckle [Volume 3, Issue 1, 2018, Pages 21-33]
-
Shavalipour, A.
Analysis of Fiber-Reinforced Polymer (FRP) Rehabilitation of Cracked Pressure Vessel Using Finite-element Method (FEM) [Volume 5, Issue 1, 2020, Pages 77-83]
-
Sheikhi Azqandi, M.
Calculation of Design Shape Sensitivity in Solid Mechanics Through a Novel Hybrid Method Using CVM and DSM [Volume 5, Issue 1, 2020, Pages 11-20]
-
Sheykholeslami, M.R.
The Prediction of Weld Line Movement in Deep Drawing of Tailor Welded Blanks [Volume 3, Issue 1, 2018, Pages 1-10]
-
Shirazi, A.
A Numerical and Experimental Investigation into the Effect of Welding Parameters on Thermal History in Friction Stir Welded Copper Sheets [Volume 2, Issue 1, 2017, Pages 1-9]
-
Shooshtari, A.
Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
-
Sobhi, S.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
-
Sodagari, H.
Optimization of a Reinforced-flat End Cap Through Analytical Study and Genetic Algorithm [Volume 4, Issue 1, 2019, Pages 1-9]
-
Soleymani, K.
An Analytical Solution and FEM Simulation for the Behavior of Sensitive FG micro-valve in Response to pH Stimuli [Volume 6, Issue 1, 2021, Pages 157-166]
-
Soltanimaleki, A.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
-
Sulaiman, S.
Improvement in Mechanical Properties of Titanium Deformed by ECAE Process [Volume 1, Issue 1, 2016, Pages 55-64]
T
-
Tadi beni, Y.
Developing of Chebyshev Collocation Spectral Method for Analysis of Multiple Structural Mechanics [Volume 5, Issue 2, 2021, Pages 109-122]
-
Tadi Beni, Y.
Thermo-mechanical Buckling Analysis of Non-homogeneous Open Circular Cylindrical Shells Reinforced with Single-walled Carbon Nanotubes [Volume 6, Issue 2, 2022, Pages 1-19]
-
Taghiloo, M.J.
Strain Analysis by Digital Shearography on an Aluminium Plate with a Geometric Defect under Thermal Loading [Volume 1, Issue 1, 2016, Pages 1-7]
-
Tahmasbi, V.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Tahmasbi, V.
Resistance Spot Welding Process of AISI 304 Steel: Application of Sensitivity Analysis and ANFIS-GWO Methods [Volume 6, Issue 2, 2022, Pages 21-29]
-
Tahmasbi, V.
Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
-
Torabi, A.
Investigation on Grease Elastohydrodynamic Lubrication [Volume 5, Issue 1, 2020, Pages 49-56]
-
Torabi, A.
Experimental Investigation of Textured Surfaces in Line and Point Mixed Lubrication Contact [Volume 6, Issue 2, 2022, Pages 59-65]
V
-
Vahdat Azad, N.
Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading [Volume 4, Issue 1, 2019, Pages 11-25]
-
Varghese, V.
Heat Production in a Simply Supported Multilayer Elliptic Annulus Composite Plate and Its Associated Thermal Stresses [Volume 2, Issue 2, 2018, Pages 55-67]
-
Velayatparvardeh, M.H.
Numerical and Experimental Analysis of the Effects of Crack on Vibration Characteristics of GFRP-stiffened Pipes [Volume 4, Issue 1, 2019, Pages 99-112]
Y
-
Yousefi, A.
Fracture Toughness of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement [Volume 5, Issue 1, 2020, Pages 85-98]
-
Yousefi Parchin Oliya, A.
Sensitivity Analysis for Stress, Heat-Treating, and Rare-Earth Elements on Fatigue Lifetime of AZ91 Magnesium Alloy [Volume 6, Issue 2, 2022, Pages 31-46]
-
Yuasa, M.
Formation of Micro Shear Bands During Severe Plastic Deformation of BCC Alloys [Volume 3, Issue 1, 2018, Pages 47-51]
Z
-
Zamani, R.
Nonlinear Stress Analysis of SMA Beam Based on the Three-dimensional Boyd-Lagoudas Model Considering Large Deformations [Volume 2, Issue 2, 2018, Pages 19-30]
-
Zamani, S. A.
Investigation of the Effect of Die Parameters on the Mechanical Properties of Pure Copper in The Combined Process of Torsional Extrusion and ECAP [Volume 5, Issue 2, 2021, Pages 83-99]
-
Zarandi, M.H.
Magneto-piezo-mechanical Stresses Analysis of a Porous FGPM Rotating Non-uniform Thickness Disc with Variable Angular Velocity [Volume 5, Issue 1, 2020, Pages 31-47]
-
Zolfaghari, M.
Optimization of Effective Parameters on the Nano-scale Cutting Process of Monocrystalline Copper Using Molecular Dynamic [Volume 4, Issue 2, 2020, Pages 127-136]
-
Zolfaghari, M.
Numerical analysis and microstructure analysis and mechanical properties of non-homogeneous laser welding process for 304L stainless steel and St37 low carbon steel by the design of experiments method [(Articles in Press)]
Your query does not match with any item